Surface Aerator” is an aerator. that are designed to have special characteristics It is a Turbine impeller which has high stirring properties and a strong suction condition that causes atmospheric air to be sucked through the impeller. Special design with air holes causing the air in the atmosphere to be sucked into the water and mixed with the propeller Aeration will serve to make the bubbles smaller. make the exchange efficient More oxygen because the smaller air bubbles take longer to exchange oxygen in the water.
1.Municipal wastewater treatment system 2. Wastewater treatment system from waste water, garbage. 3. Agricultural wastewater system 4. Pulp factory 5. Beverage factory
1.Provides high oxygen exchange rate due to special aeration impeller design. 2. Mixing of oxygen and water under water causes less oxygen loss to the atmosphere. 3. Low maintenance costs due to the use of various spare parts, standard models can be purchased online and cheap. 4. Highly durable due to the surface preparation and the coating with 2 coats of epoxy paint. 5. The diffusion of water droplets caused by stirring is minimal. due to the mixing of air into the water
It is a vertical aerator. have a large diameter of the impeller It will hit the water with stirring and pulling the water. from the bottom up to feel the air thus causing complete agitation. no air congestion It works well with large and relatively deep ponds.
Can be installed easily and quickly. There are both Floated Type and Fixed Type. For Floated Type, just bring the device into the water and fix it with a rope or wire rope, the device will float on the water surface at the desired location. and can adjust the level The depth of the propeller in the water can be adjusted by adjusting the screw. When using, just turn on the switch, it will work as needed.
1. Use a gear motor with a Service Factor of 1.8 or more, can work 24 hours a day. 2. Gear Unit is Agitator Type or Flange Type, which is used with aerators especially. 3. The body is well coated with epoxy paint. Therefore, it has a longer service life. 4. Can be used with all types of sewage wells. Depth from 1 - 5 meters 5. The amount of oxygen that can be added in water is 1.5 KgO2/ Hp-hour. 6. Design and control of construction work by engineers who have expertise in this particular field. Thus making the machine perform the function of providing air efficiently. 7. Available in sizes from 1 – 100 horsepower
1. Motor Gear (Motor Gear) with sizes from 1 – 100 horsepower 380V/3phase/50Hz , IP55 , INS. Class F gears of European or Japanese standards such as Flender, Sew, Motovario Spaggiari, Sumitomo, etc., with Agitator Type and Flange Type 2. Structure (Structure) made of mild steel (Mild Steel) coated with Epoxy anti-rust paint at the base of the machine can adjust the height of the impeller. with the power screw 3. Impeller made of Mild Steel, Conical Type Spiral Open Blade, coated with Epoxy anti-rust paint. 4. Floater made of Mild Steel coated with Epoxy anti-rust paint inside packed with foam. 5. Bolt and Nut (Bolt & Nut) are stainless steel (Stainless Steel).